Seattle Washington Construction Expert Witness Directory

Congratulations to Nicholas Rodriguez on His Promotion to Partner

November 25, 2024 — Dolores Montoya - Bremer Whyte Brown & O'Meara LLP
Bremer Whyte Brown & O’Meara, LLP is very proud to announce that Nick Rodriguez has been promoted to the position of partner with the firm! Nick has been with BWB&O since 2019 and is licensed to practice law in California and the U.S. District Courts. Nick’s practice focuses on complex construction defect matters, as well as personal injury and wrongful death claims. During his time with the firm, Nick has successfully represented numerous clients through alternative dispute resolution and has taken matters to trial where he has received favorable jury verdicts. He also supervises and manages a team of associates in the Newport Beach office. Read the full story...
Reprinted courtesy of Dolores Montoya, Bremer Whyte Brown & O'Meara LLP

Courthouse Reporter Series: Louisiana Supreme Court Holds Architect Has No Duty to Safeguard Third Parties Against Injury, Regardless of Knowledge of Dangerous Conditions on the Project

July 31, 2024 — Stu Richeson - The Dispute Resolver
In Bonilla v. Verges Rome Architects, 2023-00928 (La. 3/22/24); 382 So.3d 62, the Louisiana Supreme Court held because the terms of the agreement between the architect and the public owner did not give the architect responsibility for the means and methods of construction or for safety on the project, the architect did not have a duty to safeguard third parties against injury, regardless of whether the architect may have had knowledge of dangerous conditions on the project. In Bonilla, the City of New Orleans entered into a contract for the renovation of a building owned by the city. The city also entered into an agreement with Verges Rome Architects (“VRA”) to serve as the project architect. The general contractor on the project subcontracted the demolition work to Meza Services, Inc. (“Meza”). An employee of Meza was injured while attempting to demolish a “vault” on the project. The vault was a ten-foot by ten-foot cinderblock room with a nine-foot-high concrete slab ceiling located on the second floor of the building. The walls of the vault had been partially demolished when one of the employees of Meza was directed by his supervisor to stand on the ceiling of the vault with a jackhammer to continue the demolition. Shortly after beginning the task, the vault structure collapsed and caused the employee to suffer significant injury. Read the full story...
Reprinted courtesy of Stu Richeson, Phelps
Mr. Richeson may be contacted at stuart.richeson@phelps.com

Lawsuit Gives Teeth to Massachusetts Pay Law

September 16, 2024 — Joseph Barra - Robinson+Cole
“The Massachusetts Legislature passed the state’s Prompt Pay Act 14 years ago to improve the downstream flow of money on most large-scale private construction projects. While the act established detailed protocols for administering applications for payment and other important construction phase processes, several questions about its interpretation and impact remained unanswered. Over the years, I watched as a significant portion of the Massachusetts design and construction community either ignored the law’s exacting requirements or were unaware of their applicability. The first indication of how the act would be interpreted came in 2022, when the state appeals court decided Tocci Building Corp. v. IRIV Partners LLC. In that case, the court strictly construed the act. It held that an owner (and its agent) who failed to promptly advise the project’s general contractor of specific factual and legal reasons why it was withholding payment, coupled with a failure to certify that funds were being withheld in good faith, violated the law—making the contractor liable for the unpaid funds. Read the full story...
Reprinted courtesy of Joseph Barra, Robinson+Cole
Mr. Barra may be contacted at jbarra@rc.com

Is the Construction Industry Actually a Technology Hotbed?

August 19, 2024 — Andrew Silver - Construction Executive
Technology has always been a driving force behind progress, and the construction industry is no exception. Over the years, technological advancements have revolutionized the way companies design, plan and build structures, leading to increased efficiency, safety and sustainability. From virtual-reality simulations to drones and 3D printing, technology has transformed every aspect of the construction process. However, the construction trades still lag behind other sectors in adoption of digital technologies. With a lack of skilled labor continuing to be an impediment to growth and profitability in the construction industry, technological developments could have significant implications for successful adopters. Already, the industry is seeing a huge difference in valuation between traditional engineering and construction firms and construction software companies. As labor shortages continue to hinder growth in the industry, consolidation is likely, as is the probability that companies with the greatest tech capabilities will be the most highly valued. There are several areas of technology that are of the greatest interest in the current marketplace. BIM Building information modeling with computer-aided design software now allows architects and engineers to create detailed and accurate 3D models of buildings and infrastructure projects, integrating data about every aspect of the building, from materials and costs to energy efficiency and maintenance schedules. These models not only help in visualizing the final product; they also enable better communication and collaboration among project stakeholders. Reprinted courtesy of Andrew Silver, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the full story...

Chicago Cubs Agree to Make Wrigley Field ADA Improvements to Settle Feds' Lawsuit

December 03, 2024 — James Leggate - Engineering News-Record
Major League Baseball’s Chicago Cubs have entered into a settlement with the U.S. Dept. of Justice over renovations to Wrigley Field, federal and Cubs officials announced Oct. 31. As part of the settlement, the team agreed to update Wrigley Field with more accessibility options for people with disabilities. Read the full story...
Reprinted courtesy of James Leggate, ENR
Mr. Leggate may be contacted at leggatej@enr.com

Consider Arbitration Provision in Homebuilder’s Warranty and Purchase-and-Sale Agreement

November 18, 2024 — David Adelstein - Florida Construction Legal Updates
When you enter into a contract with a homebuilder, particularly a tract homebuilder, please consider two things when it comes to dispute resolution: (1) your purchase-and-sale agreement likely contains an arbitration provision, and (2) your limited warranty agreement you get in connection with closing likely also reinforces the arbitration provision, especially with warranty claims governed by the limited warranty agreement. This dispute resolution is important because it means the homebuilder wants disputes resolved through the arbitration process and NOT through the litigation process (where the nature of disputes and allegations are public). Look, there are pros and cons with arbitration, no different than litigation. Arbitrating a dispute is not necessarily a bad thing, and with certain disputes, ideal. There is no right to appeal in arbitration, but the dispute should resolve itself quicker than litigation, and you’ll have more control over the decision maker, i.e., the arbitrator. Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

An Overview of the New EPA HVAC Refrigerant Regulations and Its Implications for the Construction Industry

September 30, 2024 — Stefanie A. Salomon, Nadia Ennaji & Ali Heyat - Peckar & Abramson, P.C.
The U.S. Environmental Protection Agency (EPA) recently announced a series of significant changes to the rules governing the use of refrigerants in heating, ventilation, and air conditioning (HVAC) systems. These changes, which were promulgated under the American Innovation and Manufacturing (AIM) Act, are designed to phase down the use of hydrofluorocarbons (HFCs), a class of potent greenhouse gases. The AIM Act: A Game-Changer for HVAC Industry The recent changes to refrigerant regulations by the EPA signify a substantial shift in environmental policy that will have profound implications for the construction industry. For the construction industry, this means a transition to next-generation technologies that do not rely on HFCs. The AIM Act’s sector-based restrictions will affect a wide range of equipment, including refrigeration and air conditioning systems integral to building design and function. Starting January 1, 2025, the manufacturing or importing of any product in specified sectors that uses a regulated substance with a global warming potential of 700 or greater is prohibited (40 C.F.R. § 84.54(a)). The specified sectors listed include R-410A, the most common refrigerant used in the HVAC industry. The installation of systems using a regulated substance with a global warming potential of 700 or greater in specified sectors is allowed until January 1, 2026, provided that all system components are manufactured or imported before January 1, 2025. See 40 C.F.R. § 84.54 (c). “Installation” of an HVAC system is defined as the completion of assembling the system’s circuit, including charging it with a full charge, such that the system can function and is ready for its intended purpose. See 40 C.F.R. § 84.52. Reprinted courtesy of Stefanie A. Salomon, Peckar & Abramson, P.C. and Nadia Ennaji, Peckar & Abramson, P.C. Ms. Salomon may be contacted at ssalomon@pecklaw.com Ms. Ennaji may be contacted at nennaji@pecklaw.com Read the full story...

ASCE Statement on Hurricane Milton and Environmental Threats

October 15, 2024 — Feniosky Peña-Mora, P.E., President - American Society of Civil Engineers
WASHINGTON, DC. – On the heels of the tragic damage caused by Hurricane Helene throughout the Southeast, Floridians were struck by another major hurricane, Milton, less than two weeks later. Our hearts go out to those impacted again by this storm through property damage, lack of water access, power outages, or worse, loss of life, all before getting a chance to recover from Helene. Civil engineers are dedicated to protecting the public with projects that can lessen the impacts of these storms, and we are eager to help communities rebuild as quickly as possible following events like Milton and Helene. Although we do not yet know the full scope of destruction caused by Hurricane Milton, severe weather, including compound flooding events, are increasing regularly and pose a great risk to our safety and economic vitality. While so many eyes are fixated on hurricanes impacting the Southeast, wildfires are burning across several western states, including the Elk Fire in Wyoming, the largest wildfire the Bighorn National Forest has experienced in more than a century, now spanning over 75,000 acres as the region is experiencing unusually hot and dry weather and strong winds that are helping this fire to spread rapidly. The climate impacts we are accustomed to – wildfires in the West and hurricanes in the Southeast – are getting stronger, and now environmental challenges are occurring in areas we wouldn't suspect, such as Hurricane Helene striking mountain communities in Western North Carolina that have been labeled as "climate safe-havens," and Texas dealing with annual winter storms. ASCE is a leader in codes and standards development and has created an easy-to-understand toolkit for legislators and the public to learn the benefits of these up-to-date standards and determine when and how to adopt them, making our built environment more resilient to natural catastrophes. ASCE's flagship standard, ASCE/SEI 7-22, recently underwent the most significant update to its flooding chapter to ensure structures following this standard are prepared for 500-year flood events.

SEATTLE WASHINGTON CONSTRUCTION EXPERT WITNESS DIRECTORY AND CAPABILITIES