Anaheim California Construction Expert Witness Directory

That’s a Wrap! Pennsylvania Court Holds Arbitration Clause in Online Agreement Unenforceable

May 14, 2026 — Gus Sara - The Subrogation Strategist
In Duffy v. Tatum, 2026 Pa. Super. LEXIS 112, 2026 PA Super 41, the Superior Court of Pennsylvania (Superior Court) considered whether an arbitration provision contained in the online Terms of Service on the defendant’s website were enforceable. The plaintiff, Daniel Duffy (Duffy), visited the website of defendant, Dolly, Inc. (Dolly), to purchase moving services. Duffy selected the number of movers, items to be moved and the type of vehicle needed. To complete the booking, the website required Duffy to checkmark a box labeled “By checking this box I accept the Dolly Terms of Service.” Duffy did not have to open the link or scroll to the bottom of the agreement before being able to click on the checkmark box. The Terms of Service included an arbitration provision requiring that any dispute related to the moving services to be resolved by arbitration in accordance with the American Arbitration Association. The Terms of Service did not include any statement that the user was waiving the right to a jury trial. The Superior Court found the internet Terms of Service unenforceable. During the moving process, an accident occurred and injured Duffy. In May 2024, Duffy and his wife sued Dolly and other related entities alleging negligence and loss of consortium. Dolly filed preliminary objections alleging that the parties agreed to alternative dispute resolution. The lower court overruled the preliminary objections, finding that Dolly’s website did not provide reasonably obvious notice of its Terms of Service to Duffy and, as such, Duffy never agreed to waive his constructional right to a jury trial. Dolly filed an appeal to the Superior Court. Read the full story...
Reprinted courtesy of Gus Sara, White and Williams LLP
Mr. Sara may be contacted at sarag@whiteandwilliams.com

New York Enacts First-in-the-Nation Statewide Data Center Moratorium

August 03, 2026 — Joshua L. Sturtevant - Sheppard
As of May 2026, nearly 12 gigawatts of data center load requests were in the New York Independent System Operator interconnection queue, with more than two-thirds of capacity requests entering the queue in 2025 alone. On July 14, 2026, in response to concerns over this rapid growth, Governor Kathy Hochul issued Executive Order No. 62 (the “Order”) imposing a temporary moratorium on data centers in New York State. Among the concerns cited in the Order are the cost burden on ratepayers associated with transmission upgrades required to accommodate large loads, potential environmental impacts, and large-scale water use. The moratorium is intended to halt activities while the state government develops a comprehensive legal framework for data center development. While dozens of municipal and county-level moratoriums are in place throughout the U.S., and while the legislatures of several states, including Maine, have proposed moratoriums, the Order is the first statewide moratorium to be enacted nationally. Read the full story...
Reprinted courtesy of Joshua L. Sturtevant, Sheppard
Mr. Sturtevant may be contacted at jsturtevant@sheppard.com

Every High-Tech Building Has Many Lifespans

August 16, 2026 — Aarni Heiskanen - AEC Business
When I worked as an architect, our team designed a laboratory for fuel research. The facility included a large research hall where various boilers and other devices were tested and analyzed. The setup required extensive floor channeling under the thick concrete floor. We suggested building a modular system that would allow flexibility in the future, when requirements would certainly change. They did not want that because of budget constraints. The high-tech construction trend is spreading. Data centers, semiconductor fabs, battery plants, and life science facilities share one property that sets them apart from ordinary buildings. The technology inside turns over faster than the structure around it. Server generations change every three to five years. Rack densities have risen from 10 or 20 kW to 130 kW and beyond in just a few years. A high-tech facility is really several buildings with different lifespans inside one envelope, and we keep designing them as if they were one. The failure is not that things become obsolete. It is that we never say when each layer is expected to. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Endra Rethinks MEP Design with AI

July 06, 2026 — Aarni Heiskanen - AEC Business
Niklas Lindgren, co-founder and CEO of Endra, joins the AEC Business Podcast to discuss why his Stockholm-based startup is rebuilding MEP design from the ground up with AI. Endra recently raised $50 million in Series A funding and counts some of the world’s largest engineering consultancies as customers. Niklas explains why Revit’s underlying data model is too coarse to support deep automation, and why Endra built its own granular 3D data model instead of working as a plugin. He describes Endra’s “spatial AI” approach to routing conduit and ductwork without clashes, and how the platform models entire electrical systems, from receptacle to transformer, inside a single source of truth. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Sausage-Making Often Relies on the Good Sense of the Chef Rather than the Recipe

June 23, 2026 — Garret D. Murai - California Construction Law Blog
Even for lawyers, the rules governing litigation can get complex and convoluted. Does something need to be filed? What needs to be filed? When is the deadline for filing? Simple questions with not always with straightforward answers. This was the case in R & J Sheet Metal, Inc. v. W.E. O’Neil Construction Co. of California, 111 Cal.App.5th 878 (2025), which involved sheet metal panels lost when they fell into the Port of Long Beach harbor. Read the full story...
Reprinted courtesy of Garret D. Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

One Year In: A Look at the Initial Impacts of LEED v5 on the Built Environment

October 20, 2026 — Eric Haggstrom - Construction Executive
As federal climate policies shift, the built environment has entered a period of uncertainty where developers, designers and owners need to find pragmatic, forward-looking approaches to sustainability. A year after its launch on April 28, 2025, LEED v5 is helping lead that charge by pushing the industry toward a stronger long-term focus on carbon reduction, climate resilience and building performance. The framework of this certification provides a snapshot of the current state of the industry and an indication of where it may be headed in the future. LEED v5’s introduction has helped to begin reframing and informing the approaches of both mission-driven and cost-conscious clients, providing a framework to align their decisions more closely with sustainable priorities by emphasizing carbon reduction, energy efficiency and electrification. These standards can help teams make investments strategically by phasing in upgrades, planning for future technologies and demonstrating how the rating system is influencing long-term decision-making across projects. Reprinted courtesy of Eric Haggstrom, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the full story...

AI Data Centers Become City-Scale Infrastructure, Prompting New Industry Playbook

August 11, 2026 — Bryan Gottlieb - Engineering News-Record
AI data centers are no longer just buildings. They are increasingly reaching power-demand levels more commonly associated with municipalities, prompting industry groups to launch a new framework they say is needed to keep pace with rapidly changing power, cooling and reliability requirements. Read the full story...
Reprinted courtesy of Bryan Gottlieb, Engineering News-Record
Mr. Gottlieb may be contacted at gottliebb@enr.com

Not Every Job Is Worth Winning: Contract Risk Questions Contractors Should Ask Before They Bid

September 29, 2026 — Jack Mayo - ConsensusDocs
Introduction Winning the work is not the same as winning the project, at least financially. Consider a contractor that commits to procure custom or long-lead materials before receiving complete construction documents. Depending on the language of the contract, if the final design is altered after those materials have been ordered, the contractor may be left responsible for replacement costs, procurement delays, or both. Alternatively, a subcontractor that accepts a pay-if-paid provision without investigating the owner’s financing, or prematurely waives lien rights, potentially risks nonpayment for properly performed work. Such concessions can quickly transform an apparently profitable project into a significant financial burden. A successful bid can therefore become an unsuccessful project if the contractor accepts contractual “red flags” without evaluating their consequences and the long-term financial impacts that they may have. The significance of each risk will depend on the project, the parties, the proposed contract, applicable law, and the contractor’s business objectives. Although not comprehensive, this article identifies several key considerations for that process to help mitigate certain risks. Read the full story...
Reprinted courtesy of Jack Mayo, Jones Walker LLP
Mr. Mayo may be contacted at jmayo@joneswalker.com

ANAHEIM CALIFORNIA CONSTRUCTION EXPERT WITNESS DIRECTORY AND CAPABILITIES